Search results for "Beam emittance"
showing 10 items of 10 documents
A linear radiofrequency quadrupole ion trap for the cooling and bunching of radioactive ion beams
2000
A linear radiofrequency quadrupole ion guide and beam buncher has been installed at the ISOLTRAP mass spectrometry experiment at the ISOLDE facility at CERN. The apparatus is being used as a beam cooling, accumulation, and bunching system. It operates with a buffer gas that cools the injected ions and converts the quasicontinuous 60- keV beam from the ISOLDE facility to 2.5-keV beam pulses with improved normalized transverse emittance. Recent measurements suggest a capture efficiency of the ion guide of up to 40% and a cooling and bunching efficiency of at least 12% which is expected to still be increased. The improved ISOLTRAP setup has so far been used very successfully in three on-line e…
A linear radiofrequency ion trap for accumulation, bunching, and emittance improvement of radioactive ion beams
2000
An ion beam cooler and buncher has been developed for the manipulation of radioactive ion beams. The gas-filled linear radiofrequency ion trap system is installed at the Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN. Its purpose is toaccumulate the 60-keV continuous ISOLDE ion beam with high efficiency and to convert it into low-energy low-emittance ion pulses. The efficiency was found to exceed 10\,\% in agreement with simulations. A more than 10-fold reduction of the ISOLDE beam emittance can be achieved. The system has been used successfully for first on-line experiments. Its principle, setup and performance will be discussed. An ion beam cooler and buncher has been developed fo…
Hot-cavity studies for the Resonance Ionization Laser Ion Source
2016
International audience; The Resonance Ionization Laser Ion Source (RILIS) has emerged as an important technique in many Radioactive Ion Beam (RIB) facilities for its reliability, and ability to ionize target elements efficiently and element selectively. GISELE is an off-line RILIS test bench to study the implementation of an on-line laser ion source at the GANIL separator facility. The aim of this project is to determine the best technical solution which combines high selectivity and ionization efficiency with small ion beam emittance and stable long term operation. The ion source geometry was tested in several configurations in order to find a solution with optimal ionization efficiency an…
Direct Measurement of Focusing Fields in Active Plasma Lenses
2018
Physical review accelerators and beams 21(12), 122801 (2018). doi:10.1103/PhysRevAccelBeams.21.122801
Source of Polarized Electrons for MAMI B
1991
A source of polarized electrons has been set up in order to inject polarized electrons into the 855 MeV c.w. electron accelerator MAMI B at the Mainz nuclear physics institute. It is based on photoemission of the 3/5 semiconductor GaAsP and will provide a d.c. current of 100 µA with a beam emittance of 1π mm mrad, and a polarization of about 40%.
Resonant transition radiation in the X-ray region from a low emittance 855 MeV electron beam
1994
The interference of transition radiation coherently produced from a periodic stack of four polyimide foils of 7.2 μm thickness and a separation of 162 μm was investigated. This stack has been brought into the low emittance (3 π nm rad) electron beam of the 855 MeV Mainz Microtron MAMI. Transition radiation was observed in the energy range from 2 to 15 keV with a LN2-cooled pin photodiode. A good energy resolution of 0.8 keV and angular resolution of 0.15 mrad was achieved simultaneously allowing for the first time to quantitatively study the interference pattern. Good agreement with theoretical calculations is found. Prospects to exploit transition radiation in the x-ray region from a low e…
Present state of the MAMI control system
1990
Abstract MAMI (Mainz Microtron) is an electron accelerator consisting of a cascade of three race-track microtrons, with an output electron beam of 855 MeV and 100 μA cw [1]. The first two stages (output energy 180 MeV) were operative for nuclear-physics experiments from 1983 to 1987 and have since been transferred to a new building. They will serve as an injector for the third stage, now under construction. The control system for MAMI was based on a versatile process communication software system for a network of processors with multiprocess operating systems. This system has previously proved very successful, so we decided to rely on it as control system for the new, upgraded accelerator, …
Optical spectroscopy and performance tests with a solid state laser ion source at HRIBF
2008
An ISOLDE-type hot-cavity laser ion source based on high-repetition-rate Ti:Sapphire lasers has been set up at the Holifield radioactive ion beam facility. To assess the feasibility of the all-solid-state laser system for applications at advanced radioactive ion beam facilities, spectroscopy and performance tests have been conducted with this source. The results of recent studies on excitation schemes, source efficiency, beam emittance and ion time structure are presented.
The REX-ISOLDE project
2002
REX-ISOLDE is a pilot experiment at ISOLDE/CERN to study the structure of neutron-rich nuclei (N=20, N=28) with post-accelerated radioactive ion beams (1). Therefore radioactive ions with charge state 1+, which are delivered by the online mass separator ISOLDE, are accelerated up to 2.2 MeV/u by means of a new concept. The radioactive ions are first accumulated in a Penning trap, then charge breeded to a charge-to-mass ratio of 1/4.5 in an Electron Beam Ion Source (EBIS) and finally accelerated. The LINAC consists of three components, namely a Radio Frequency Quadrupole (RFQ) accelerator, which accelerates the ions from 5 to 300 keV/u, an interdigital H-type structure (IH) with a final ener…
A study of the optical effect of plasma sheath in a negative ion source using IBSIMU code
2020
A plasma sheath inside an ion source has a strong focusing effect on the formation of an ion beam from the plasma. Properties of the beam depend on the shape and location of the plasma sheath inside the source. The most accessible experimental data dependent on the plasma sheath are the beam phase space distribution. Variation of beam emittance is a reflection of the properties of the plasma sheath, with minimum emittance for the optimal shape of the plasma sheath. The location and shape of the plasma sheath are governed by complex physics and can be understood by simulations using plasma models in particle tracking codes like IBSimu. In the current study, a model of the D-Pace’s TRIUMF lic…